|
I chose not to implement the "injector failure
switches". I don’t know if there are any statistics on it, but I suspect
injector failure is an extremely rare occurrence. On the other hand if one
did fail I'd rather fly the plane and troubleshoot the problem after I'm on the
ground. But that’s part of the advantage in going the Experimental route -
build it the way you want it.
Mike Wills
Sent: Monday, March 15, 2010 8:47 AM
Subject: [FlyRotary] Re: Civil Discourse was : [FlyRotary] Re:
Ut-Oh...
In the event of a primary or secondary injector failure, the affected
injector set can be switched off and the cold start switch used to richen up the
remaining injectors. This as per Tracy's instructions. I haven't tried this, and
hope I never have to in the heat of battle, but there it is.
Brian Trubee
|