flyrotary@lancaironline.net Arkiva e Listës së E-mailave

LOL....while I love you's guys, I didn't quite go that far. Actually, Charlie was my grandfather's name.

About to head out to the hangar and move my Velocity, under its own power hopefully <g> to the city tie downs and finish moving expensive items to the storage locker provided by the city during the roof construction. They are slated to start on Monday....but it is a city project, so who knows.

Gee, I hope I can do some panel stuff on my kitchen table during the forced hiatus. I removed the panel and the support hardware the other day leaving only the wires to the engine switches. Will likely remove the EC2 and EM as well after it is tied down properly.

All the best,

Chris Barber

Houston

From: Rotary motors in aircraft [flyrotary@lancaironline.net] On Behalf Of Bob Perkinson [bobperk90658@bellsouth.net]
Sent: Saturday, November 14, 2009 12:14 AM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Still quiet

Gee you didn't go and name that boy after Charlie England did you. You know he will have a hard time if you did that

Bob Perkinson

From: Chris Barber <cbarber@texasattorney.net>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Sent: Thu, November 12, 2009 1:07:28 PM
Subject: [FlyRotary] Re: Still quiet

I feel your pain....it is VERY similar with composite construction. What was a limp simple strand of wet out, un-cured fiberglass last night, today it is a sliver or needle searching for a part of my body to pierce, cut or scrape. My hands often look like I have gotten into a slap fight with a clawed cat.

Uh, as to DNA....I just had my test, thank you. I guess I am the father of a 23 day old child (Charlie) AND a embryonic (pre-first flight) Velocity w/ a 13b <g>

All the best,

Chris Barber
Houston
________________________________________
From: Rotary motors in aircraft [flyrotary@lancaironline.net] On Behalf Of Ernest Christley [echristley@nc.rr.com]
Sent: Thursday, November 12, 2009 12:09 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Still quiet

Rogers, Bob J. wrote:
> If you are going to build an aluminum airplane, you either need to wear gloves or buy a lot of band-aids. Ask me how I know.
>
>
If you do that, the FAA won't know you built the plane when they do the
DNA tests.

--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html