|
|
I started filling the engine with coolant and as soon as the level
reached bolt #3 it started to weep. Pulling the pump off the housing
gave no indication of why the leakage. Per the haynes manual the bolts
were tightened in the specified sequence and to 20 ft lbs. I did
tighten to 25ft lbs, but it still continued to leak. Any guidance on how much torque the threads on aluminum pump housing can take?
The drip rate is felt considerable as there was no pressure( http://www.youtube.com/watch?v=2ImqWkP8sDw ) other than 1/4" of standing fluid.
Any thoughts?
I am getting a new gasket and will try again of course.
IMG_0635.JPG
IMG_0636.JPG
IMG_0637.JPG
|
IMG_0635.jpeg
IMG_0636.jpeg
IMG_0637.jpeg
|
|