Kevin,
What does your coolant flow design look like?
Bill B
From: Rotary
motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of kevin lane
Sent: Monday, August 17, 2009 2:45
PM
To: Rotary motors in aircraft
Subject: [FlyRotary] swirl pot
I need to design a swirl pot for my
renesis/rv6a installation. is there an accepted volume I need to work
with? it's my understanding that the water pump outlet goes thru the
swirl pot and then on to the radiator input, and that the pot should be close
to the pump. would it make sense to look into the pot welded to the pump,
if possible? are pots always cylindrical? kevin