|
|
Todd Bartrim wrote:
Thanks for the quick reply Ernest. I didn't expect you up so late on your side of the continent. Is yours a genuine Harley part?
How about dimensions?
-OD of the rotor
Just over 6". You'll want at least 6.25" for clearance. From memory, ID is just over 1.5" I believe. It's a fairly tight fit on the sun gear shaft. I believe the shear bolts are a 4" spacing.
-ID of the stator
It's all put together, so that number is rather difficult to come by right now. I believe it is right at 3". I'm thinking the bolt circle was 3.375" diameter, but I'm going to have to reserve the right to be wrong.
-Thickness
1.75"
I fabricated a fiberglass shield that sits between the stator and PSRU. The object being to keep trash out of the rotor.
--
http://www.ernest.isa-geek.org
|
|