Mailing List flyrotary@lancaironline.net Message #45821
From: Christopher Owens <rotary@cmowens.com>
Subject: Re: SPAM-LOW: [FlyRotary] Re: Exhaust system wall thickness
Date: Sat, 25 Apr 2009 16:49:52 -0500
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Thanks Bobby.  The Renesis is the engine that's highest on my list of consideration, to be sure.   I have yet to acquire one, however.  I'll certainly keep the stock exhaust manifold in mind, though.

Fact gathering at the moment, so that when the time comes, I'll be prepared.

Best regards,
Chris

On Apr 25, 2009, at 2:59 PM, Bobby J. Hughes wrote:

Chris,

If I remember correctly you have a Renesis. If so, the stock manifold
can easily be cut down and used. It's a little heavy but you don't have
to worry about it holding up. I may try a lighter manifold in the
future. But for now it's one less thing to worry about during the first
100 hrs. The stock manifold can be had for under $100 but may take some
looking. It also has a good heat shield that can be partly used. At
least three folks on this list have taken this approach.

Here's one on Ebay with no reserve and no bids.
http://cgi.ebay.com/ebaymotors/RX8-Exhaust-Manifold-and-O2-sensor-No-Res
erve_W0QQitemZ230338894473QQcmdZViewItemQQimsxZ20090423?IMSfp=TL09042314
10006r30271


Bobby Hughes
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster