|
Great going, Bobby! Always a thrill the
first, second, third .........nth, time the engine fires up - but, the
first is the most memorable. Quick question - what are the flow rates on
your primary and secondary injectors - are they the same??
Ed
----- Original Message -----
Sent: Sunday, May 04, 2008 8:50 PM
Subject: [FlyRotary] Renesis First
Start
Saturday with the
help of Mark Steitle I was able to start my renesis. Had to run higher
rpm's to keep to it running. Wideband O2 showed lean at lower rpm's.
Today after adjusting the fuel pressure to 42 psi (was 30 psi) I was
able to idle much lower. My Advanced Flight System EFIS\ engine monitor fuel
injector circuit is not putting out a tach signal so no idea on the
actual rpm's. Two primer clicks and it starts right up.
Bobby J
Hughes
|