flyrotary@lancaironline.net Mailing List Archive

Joe, I would recommend the style that Dale has designed. I think you will find the fitting is a nice place to hang your oil pressure sensor and perhaps even an oil temp sensor. I got the block off plate from Mazdatrix, but ended up drilling holes and tapping it for those accessories - which Dale as already done.

FWIW

----- Original Message -----

From: Joe Berki

To: Rotary motors in aircraft

Sent: Sunday, April 06, 2008 9:35 AM

Subject: [FlyRotary] Re: Oil Filter adapter

Lynn,

Actually, both. I am currently concerned about how to move the oil filter from the top of the engine to some where more conveinent so both of the components will be needed.

Joe Berki

Limo EZ

----- Original Message -----

From: Lehanover@aol.com

To: Rotary motors in aircraft

Sent: Saturday, April 05, 2008 10:15 PM

Subject: [FlyRotary] Re: Oil Filter adapter

Are you asking about the aluminum block that replaces the oil filter adaptor on the rear iron, or, the remote filter mount that the filter screws onto?

Lynn E. Hanover

In a message dated 4/5/2008 7:02:45 PM Pacific Daylight Time, echristley@nc.rr.com writes:

Joe Berki wrote:
> Does anyone make a remote oil filter adapter for 2nd gen engines? Thanks for any help
>
> Joe Berki
> Limo EZ

Planning your summer road trip? Check out AOL Travel Guides.

No virus found in this incoming message.
Checked by AVG.
Version: 7.5.519 / Virus Database: 269.22.7/1361 - Release Date: 4/5/2008 7:53 AM