flyrotary@lancaironline.net Mailing List Archive

I could be wrong but I assumed that the 89 - 91 rotors weighed the same as 3rd gen so the counterweights were the same as well. I'll have to dig up my list of rotor weights to be sure though. Brain fade happens.

Tracy

On Feb 5, 2008 8:01 PM, Kelly Troyer <keltro@att.net> wrote:

Joe,

A 3rd gen counterweight and flex plate will fit 2nd gen 13B but the counterweight

will put the 2nd gen out of balance unless rotors and both counterweights from the

3rd gen are installed also...........On another note if this engine is for an A/C using

Tracy's redrive you must use a 2nd gen flexplate........FWIW

--
Kelly Troyer
"Dyke Delta"_13B ROTARY Engine
"RWS"_RD1C/EC2/EM2
"Mistral"_Backplate/Oil Manifold

-------------- Original message from "Joe Berki" <jskmberki@alltel.net>: --------------

Will a flex plate and counterweight from a 3rd gen 13b fit a 2nd gen 13b? How much for a flex plate and counterweight? Thanks for any help.

Joe berki

Limo EZ