|
|
Bill,
You might try these folks:
http://www.greenskyadventures.com/Installation_items/vibmntimages.htm
Durometer ratings are in the chart at the bottom of the page.
Dale R.
Tracy Crook wrote:
Don't know the rating that he used on your mount but the Barry Control made isolators are available in a wide range of load ratings from McMaster Carr. The fronts should be a higher rating than the rears and the front left (if a right hand prop is used) should be a bit stiffer than the right due to engine torque. This applies to a tractor installation.
Tracy
|
|