|
|
The Micro-1000 probes from ACS are $28.95.
http://www.aircraftspruce.com/catalog/inpages/micro6egt.php
The only problem is that different probes use different hole sizes.
Could be a problem if your current ones are larger.
Bob W.
Bob;
Thanks for lead. It's interesting that they are guaranteed; but I'
concerned that the SS housing may not last long 2" from the port in a
rotary. The ones I've been using are inconel 600 which I think is a better
bet. Also since my wiring assumes the 4' leads, I better stick with the
same kind I've got.
Happy New Year!!
Al
On Sat, 29 Dec 2007 09:50:58 -0800
"Al Gietzen" <ALVentures@cox.net> wrote:
Where's the best place (least expensive) to get the hose-clamp type EGT
probes with leads? I got my initial set from GRT, but now one has failed
after about 80 hours. Is their $36 price about as good as it gets?
Al
--
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
3.8 Hours Total Time and holding
Cables for your rotary installation - http://roblinstores.com/cables/
--
Homepage: http://www.flyrotary.com/
Archive and UnSub:
http://mail.lancaironline.net:81/lists/flyrotary/List.html
|
|