Received-SPF: none
 receiver=logan.com; client-ip=68.230.241.43; envelope-from=alventures@cox.net
From: "Al Gietzen" <ALVentures@cox.net>
To: "'Rotary motors in aircraft'" <flyrotary@lancaironline.net>
Subject: RE: [FlyRotary] Re: EGT thermocouples
Date: Mon, 31 Dec 2007 09:32:59 -0800
Message-ID: <000001c84bd3$3029af40$6401a8c0@BigAl>
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: 7bit
Importance: Normal
In-Reply-To: <list-2624247@logan.com>

The Micro-1000 probes from ACS are $28.95.
http://www.aircraftspruce.com/catalog/inpages/micro6egt.php
The only problem is that different probes use different hole sizes.
Could be a problem if your current ones are larger.

Bob W.

Bob;

Thanks for lead.  It's interesting that they are guaranteed; but I'
concerned that the SS housing may not last long 2" from the port in a
rotary.  The ones I've been using are inconel 600 which I think is a better
bet.  Also since my wiring assumes the 4' leads, I better stick with the
same kind I've got.

Happy New Year!!

Al

On Sat, 29 Dec 2007 09:50:58 -0800
"Al Gietzen" <ALVentures@cox.net> wrote:

> Where's the best place (least expensive) to get the hose-clamp type EGT
> probes with leads?  I got my initial set from GRT, but now one has failed
> after about 80 hours.  Is their $36 price about as good as it gets?
> 
>  
> 
> Al
> 
> 


-- 
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
3.8 Hours Total Time and holding
Cables for your rotary installation - http://roblinstores.com/cables/

--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:
http://mail.lancaironline.net:81/lists/flyrotary/List.html