----- Original Message -----
Sent: Wednesday, August 15, 2007 11:10
AM
Subject: [FlyRotary] Re: Plugging Oil
Injector Ports
Joe,
Size is 10mm diameter x either 1.25 or 1.50 thread pitch (cannot
remember which)....I used
the bolts that connect the torque converter to the flexplate of RX7
automatic transmission.....
Use one of the copper washers under the bolt head that was under the oil
injector nozzle to
seal the bolt.......If torque converter bolts are not handy just shorten
a 10mm bolt of correct
pitch........FWIW
--
Kelly Troyer
"Dyke Delta"_13B
ROTARY Engine
"RWS"_RD1C/EC2/EM2
"Mistral"_Backplate/Oil Manifold
--------------
Original message from <jewen@comporium.net>: --------------
What is the thread size for plugging the oil injector ports? Does
anyone have a source?
Thanks,
Joe