|
Joe,
Size is 10mm diameter x either 1.25 or 1.50 thread pitch (cannot remember which)....I used
the bolts that connect the torque converter to the flexplate of RX7 automatic transmission.....
Use one of the copper washers under the bolt head that was under the oil injector nozzle to
seal the bolt.......If torque converter bolts are not handy just shorten a 10mm bolt of correct
pitch........FWIW
--
Kelly Troyer
"Dyke Delta"_13B ROTARY Engine
"RWS"_RD1C/EC2/EM2
"Mistral"_Backplate/Oil Manifold
-------------- Original message from <jewen@comporium.net>: --------------
What is the thread size for plugging the oil injector ports? Does anyone have a source?
Thanks,
Joe
|