Mailing List flyrotary@lancaironline.net Message #39027
From: Ed Anderson <eanderson@carolina.rr.com>
Subject: Re: [FlyRotary] pressure regulator
Date: Mon, 13 Aug 2007 16:32:24 -0400
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
 Message Header

Undecoded Message
The vacuum from one will suffice, although I personally like to T off of both.  Even out the pulsation a bit better.  Some folks have used a small air/fuel filter to smooth out the pulses as best I recall. 
 
Ed
----- Original Message -----
Sent: Monday, August 13, 2007 4:02 PM
Subject: [FlyRotary] pressure regulator

Do I need to tee off from both the rotor one and two for the fuel pressure regulator, or will the vacuum  from one rotor be enough.  At the present I have a vacuum point in the intake manifold (each runner) about 6 inches from the Weber Carb, throttle body.  JohnD
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster