|
|
My oil cooler opening was 9" x 3.5" and it was cooling very well.
Buly
On Jul 11, 2007, at 1:47 PM, Bobby J. Hughes wrote:
Thanks Ed.
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Ed Anderson
Sent: Wednesday, July 11, 2007 10:31 AM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Oil cooler opening size
Hi Bobby,
18 sq in is a bit smaller than what I have. Mine is 10 1/2" wide and averages 2 1/2" high. However, I also use it to feed my engine intake which is a hole off to one side and right in front of the core where the high pressure area builds up. Here are a couple of photos of openings.
ED
----- Original Message -----
From: Bobby J. Hughes
To: Rotary motors in aircraft
Sent: Wednesday, July 11, 2007 1:19 PM
Subject: [FlyRotary] Oil cooler opening size
Ed,
Using your oil cooler scoop / duct what is the approximate size of the opening? I show the stock oil cooler being 18" x 5". 20% would be 18 sq. in.
Bobby
|
|