Received-SPF: pass
 receiver=logan.com; client-ip=205.152.59.65; envelope-from=atlasyts@bellsouth.net
Mime-Version: 1.0 (Apple Message framework v752.2)
In-Reply-To: <list-2171394@logan.com>
References: <list-2171394@logan.com>
Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed
Message-Id: <C8550946-F4F6-4F63-9030-9C8E6D33F332@bellsouth.net>
Content-Transfer-Encoding: 7bit
From: Bulent Aliev <atlasyts@bellsouth.net>
Subject: Re: [FlyRotary] Re: Oil cooler opening size
Date: Wed, 11 Jul 2007 18:24:00 -0400
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>

My oil cooler opening was 9" x 3.5" and it was cooling very well.
Buly


On Jul 11, 2007, at 1:47 PM, Bobby J. Hughes wrote:

> Thanks Ed.
>
> From: Rotary motors in aircraft  
> [mailto:flyrotary@lancaironline.net] On Behalf Of Ed Anderson
> Sent: Wednesday, July 11, 2007 10:31 AM
> To: Rotary motors in aircraft
> Subject: [FlyRotary] Re: Oil cooler opening size
>
> Hi Bobby,
>
> 18 sq in is a bit smaller than what I have.  Mine is 10 1/2" wide  
> and averages 2  1/2" high.  However, I also use it to feed my  
> engine intake which is a hole off to one side and right in front of  
> the core where the high pressure area builds up.  Here are a couple  
> of photos of openings.
>
> ED
> ----- Original Message -----
> From: Bobby J. Hughes
> To: Rotary motors in aircraft
> Sent: Wednesday, July 11, 2007 1:19 PM
> Subject: [FlyRotary] Oil cooler opening size
>
> Ed,
>
> Using your oil cooler scoop / duct what is the approximate size of  
> the opening?  I show the stock oil cooler being 18" x 5".  20%  
> would be 18 sq. in.
>
> Bobby
>
>
>