Try your local Japanese motorcycle shop. They usually have quite a few speciality metric bolts. It will cost more but the quality is most often good. You would need to bring the old one to match up or a similar example. I fit's actually 12mm it will be among the largest they carry.
Bill Jepson


-----Original Message-----
From: Wendell Voto <jwvoto@itlnet.net>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Sent: Thu, 5 Jul 2007 6:24 am
Subject: [FlyRotary] Re: Bolt size



 


----- Original Message -----

From: Lehanover@aol.com

To: Rotary motors in aircraft

Sent: Thursday, July 05, 2007 12:27 AM

Subject: [FlyRotary] Re: Bolt size





In a message dated 7/5/2007 12:06:50 A.M. Eastern Daylight Time, jwvoto@itlnet.net writes:


I need to know the size of the larger bolt that goes thru the oil pan and was part of the original engine mount in a car. I think it may be 12mm x1.25 but can' find any that size. The original one I have are too long and if you would cut them off all the threads would be lost.

Wendell





Try Sears Home and Garden centers,  Lowes, and NAPA for metric bolts that are all threads.

 

Lynn E. Hanover


Already tried those sources, no luck; even went to a specialy hardware store, same results.

Wendell



------------------------------------------------------------
See what's free at AOL.com.



________________________________________________________________________
AOL now offers free email to everyone.  Find out more about what's free from AOL at AOL.com.
=0