|
|
Hi Bill,
I used the K&N RR-2803 because it fit my throttle body and allowed air
in thru the sides and center. I don't see anything on K&N's site that
tells me it's area, but it seemed to work OK. I had it pointing
straight to the front. It's 5.875" OD at the base, 5.25" OD at the top,
and 5" high and fits a 2.75" throttle body.
Bob W.
On Thu, 31 May 2007 16:16:32 -0400
Bill Bradburry <bbradburry@allvantage.com> wrote:
Does anybody know what the CFM intake air flow is on the rotary? I am thinking about the size of air filter I would need. For instance, what size K&N filter would I use? I would like to provide ram air thru the filter.
I was considering the conical type filter, but it looks like the size of it may be a show stopper. I am pretty limited in the space available for a filter and do not want to make too convoluted a path to the throttle body. What is the best guess on the number of square inches of filter required?
Any help would be appreciated.
Thanks,
Bill B
--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
--
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
3.8 Hours Total Time and holding
Cables for your rotary installation - http://www.roblinphoto.com/shop/
|
|