|
|
Hi Dave,
If you need Lynn Hanovers instructions on finding TDC, I have them at
http://tinyurl.com/2sxe9d. (Thanks again Lynn!). If you are sure
you have TDC, the easiest thing to do is count the teeth on the ring
gear, figure out how many teeth are 35 deg and use it to move the crank
back and reset the CAS.
Bob W. On Wed, 30 May 2007 08:45:14 -0500
David Staten <Dastaten@earthlink.net> wrote:
We will look into this. I do not have the original crank pully on the motor so we will have to do some figuring here.
--
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
3.8 Hours Total Time and holding
Cables for your rotary installation - http://www.roblinphoto.com/shop/
|
|