Mailing List flyrotary@lancaironline.net Message #37267
From: Dennis Haverlah <clouduster@austin.rr.com>
Subject: Re: [FlyRotary] Re-drive oil temp
Date: Tue, 22 May 2007 11:10:46 -0500
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Al
My RD-1C on my Renesis also runs quite hot.  I have been wordering if this is normal.  I don't have a temp measurment on it at this time.
Dennis H.

Al Gietzen wrote:

I’m seeing oil temps out of the re-drive (RD-1B) about 30-40F higher than the oil in at cruise power on my 20B.  Is this typical?

 

This is a bit higher than I was previously seeing. I use an EGT TC to monitor the temp, and recently changed from an ‘ungrounded’ to ‘grounded’ TC connection/configuration; which could account for the difference.

 

Al

Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster