|
|
On Sun, 13 May 2007 21:50:17 -0800
"Al Gietzen" <ALVentures@cox.net> wrote:
Ed, Do you think it may have something to do with the new wiring that eliminates the powering the EC thru the injector switches?
You mentioned something about it?
Buly,
The blinking NOP tells you that the EC2 is not powered up; so check the EC2
power wiring. I suppose it is possible that you have been running the EC2
powered via the injector power.
Good luck
Al
It could be the EC2 isn't powered up, or just that the serial data link
isn't working.
Bob W. (Also wishing good luck!)
--
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
3.8 Hours Total Time and holding
Cables for your rotary installation - http://www.roblinphoto.com/shop/
|
|