Bob are you talking about clocking the volute housings relative to the
center housing? If so all you do is loosen the bands and rotate them where
you want, retighten the bands to the proper torque. You may need to tap on
the bands to get them to pop loose and tap on them again after you torque
them and then recheck the torque.
Tim Andres

-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of Bob Tilley
Sent: Saturday, March 10, 2007 5:52 AM
To: Rotary motors in aircraft
Subject: [FlyRotary] Turbo trim

Folks,

I've recently bought a Garrett turbo, but it has the wrong trims.
Does anyone know where I can get the trim changed reasonably?

Bob