|
|
George do you have a web site with single rotor info? I am just getting interested myself. I have the raw materials for two p ported engines not including the e shafts. I am going to contact Richard Sohn also. I have not done an archive search yet, so that will be first. Jerry
On Dec 8, 2006, at 5:11 PM, George Lendich wrote:
Jerry,
Tell him to consider a single rotor- with PSRU.
George (down under)
Perry are you still using direct drive? What max RPM are you or were you using, what prop, etc. A friend who is building a Buttercup (Steve Whitman design) that only needs 100/125 hp. 13B with redrive is too heavy but without a drive it is a possibility. Jerry
On Dec 8, 2006, at 1:43 PM, Perry Mick wrote:
I just installed a CDI system on the leading coil in my RX-7, testing it out before possibly putting it in the airplane.
I don't have an issue with carbon plug fouling, only the dreaded lead. Is the lead fouling an insulation effect (a lead compound) on the electrode? If so, then I could see where a CDI system would help punch through. However, if the plugs are fouling because the lead puts a conductive film on the ceramic insulator, causing the electrode to be shorted to ground, then maybe a CDI system can't help with that?
Interesting stat: I have never ever in hundreds of hours flooded the rotary engine on my Long-EZ. It always starts on the first crank.
--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/
--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/
|
|