Buly,
I will never give Dale anything again - he doesn't even remember ya!
That's a YES ! on the mm, or it's a bloody big exhaust flange - just joking!
George ( down under)

Thanks Dale. I assume the measurements are in mm.
Buly



On Jul 17, 2006, at 1:50 PM, Dale Rogers wrote:

Hi All,

   In a "blast from the past", I located this GIF of a 'print for
the flange
among my files.  Dunno who I got it from.  Dunno if it is as useful
as a CAD dwg.  But here it is.

Dale R.


cardmarc@charter.net wrote:

Can you save it in a downward version of Autocad previous to 2004
so most of us could see it....I have 2002; lower the save year the
better. Marc W. ---- george lendich <lendich@optusnet.com.au> wrote:

MessageOK Bill - where do I sent it, it's AutoCAD 2004. You too
Buly. Contact me at lendich@optusnet.com.au and I will reply with
the drawings. Just check that the exhaust port is the size you
want it. I made mine to fit the Cosmo, which is larger than
normal exhaust ports at 2"- you may wish to change that size,
however from discussion with Bill Jepson, he suggests that the
exit is better to be a bit larger than a bit too small. I had it
cut from 6mm SS. Just to make things difficult the bolt holes are
different from port centre, and it took me ages to get this
right. I must have cut a dozen templates to get it right, it's
not as if you can mark it from the inside. Happy to help -
always! George ( down under) ----- Original Message ----- From:
Bill Schertz To: Rotary motors in aircraft Sent: Monday, July 17,
2006 8:57 AM Subject: [FlyRotary] Re: Fw: Engine flanges. George,
I would be interested in the drawing, and apparently so would
Buly. Mine were made off of a pattern that Kevin made, and they
are beefier than necessary, but probably won't warp too bad
either. Bill Schertz KIS Cruiser # 4045

<exhaust_Port_dwg.GIF>
--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/

--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/

--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/