|
|
Yep, slight angle - but shouldn't matter if the "IN" is pushing oil to the
"OUT" then the air would move right along with it and out of the cooler.
Joe Hull
----
Joe,
it can matter if the "OUT" is pointing down.
Depending on the cooler design you might have a compressed air cushion on
top of the oil crossflow.
That's one I hadn't figured would be an issue - and yes, my "Out" is
currently on the bottom. So, tonight I'll checkout the thermostat and put it back in (unless I can
figure a way out to block off the bypass at least for testing). I'll also
re-fabricate the oil lines so I can hookup the "In" hose to the bottom port
and the "Out" host to the top port (which is actually the real "Out"
anyway!).
Thanx,
Joe Hull
Cozy Mk-IV #991 (In Phase1 Flight Test - 29.1 hrs flown) Redmond (Seattle), Washington
|
|