Mailing List flyrotary@lancaironline.net Message #32229
From: Bulent Aliev <atlasyts@bellsouth.net>
Subject: Re: [FlyRotary] Re: Renesis Crank Angle Sensor
Date: Tue, 13 Jun 2006 16:32:29 -0400
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
 Message Header

Undecoded Message

 I was guessing it would be the relationship between the two. So if an additional CAS was place somewhere else on the wheel it would have to be software adjusted to work. (i think)

Bobby



Or,

an additional stock wheel could be mounted on the front of the pulley, and so long as the relationship between the pickup and the wheel is maintained, the pickup could be mounted anywhere in 360 degrees.


Lynn E. Hanover


I have all the necessary parts for the pulley CAS pickup, but my front housing (Cosmo-13B) is already cast with the distributor type CAS and I could not find a good spot to mount the coils. I like the wheel on the pulley better.
Buly
Debating if I should remove the turbo?
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster