Let the group know if Mr. Canfield is still producing louvers.......I know I
may have a need for a couple......
-------------- Original message from "Ed Anderson" <eanderson@carolina.rr.com>: --------------
Bill, the URL for his web site no longer appears current. However, I did receive a new e mail address from him recently. His new e mail is :
I would suggest sending Deforest an e mail to see if he has a new website and/or if he is still producing louvers.
He's been doing it for years, so would be surprised if he has quit. I am not certain what capability he has to produce those size louvers, but you can check.
Ed
----- Original Message -----
Sent: Monday, June 05, 2006 11:24 PM
Subject: [FlyRotary] cooling louvers
Ed,
Do you recall where you got your (now un-necessary) louvers? I am going to try an area at the top of my cowl. Can't seem to find a source for these louvers. I need 12" X 6" with the cuts going the long direction.
I ran a test today and found a minimum of 2" H2O trying to force air OUT that area. That was with my cowl flap full open. (MUCH more pressure, of course, with the flap closed.)
Does anybody think that will make a significant change in cooling air flow or am I wasting my time?
--
Bill Eslick
www.weslick.com