|
Message
I ordered an adapter (10.0x1) from ACS. This is the size I got off
this list as to what is needed for the oil pressure gauge post. Well... it
doesn't fit, the threads are finer on the oil pressure gauge sender unit.
Sooo.. what is the real thread size for the Oil pressure gauge port on the
13B? What is a good source for an adapter to go from the oil pressure port
to pipe thread?
Wendell
Hi
Wendell,
Sorry if I'm the
one that steered you wrong on this. I have a note that M10x1.0
fits, and I'm sure it did fit the ones I've tried. There was at
least one other case where one of my noted sized didn't fit someone else's
housing, so it's possible they do change from one year to the
next.
Just to be
sure, are you talking about the actual threaded hole in the rear
housing? Seems I recall that the stock arrangement used a straight
fitting that extended out from the housing to the sender. If I'm
remembering that correctly, then the sender could be different from the threaded
hole in the housing.
Good
luck,
Rusty (just back
from a family reunion)
Blank Bkgrd.gif
|