|
|
My induction system sucks, (pun intended) but it is all I have for the
moment. A butterfly valve feeds a 3" fore and aft pipe to short 4" runners
(x4) feeding the 6 ports. The temperature sensor is about 3" from the aft
end and on top of the pipe.
Does anyone have an idea of what effect this arrangement will have on
anything?
Tommy James<><
-----Original Message-----
From: Marvin Kaye [mailto:marv@lancaironline.net]
Sent: Friday, September 12, 2003 2:22 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Intake temps
Posted for Mark Steitle <msteitle@mail.utexas.edu>:
I have recently completed the wiring of my EC2, and if my memory serves me
correctly, Tracy specifically says to mount the temperature sensor upstream
of
the throttle body. I took this to indicate that he has accounted for the
temperature drop at low throttle settings. -- Mark S.
At 11:56 AM 9/11/2003 -0400, you wrote:
<... Where are you guys putting your air temp sensors ...>
Homepage: http://www.flyrotary.com/
Archive: http://lancaironline.net/lists/flyrotary/List.html
|
|