|
|
That sounds like the plane I have pictured on my RV-6 website. Take a
look:
http://members.aol.com/_ht_a/vp4skydoc/index.html
If that's the plane, then the builder is Hank from Eugene OR. I could
track down the rest of his info if you want.
David Leonard
The Rotary Roster:
http://members.aol.com/_ht_a/rotaryroster/index.html
-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]
On
Behalf Of kenpowell@comcast.net
Sent: Saturday, August 16, 2003 9:56 AM
To: Rotary motors in aircraft
Subject: [FlyRotary] Injectors
I think that I have 12 440cc injectors from '86 motors. But...I'm not
going to
use any of them. I'm going to buy a set of 8 42lb injectors marketed
to
the
Mustang guys. I think they are Bosch, but not sure about that. I'll
only
need
4 of them, but for $329 they will be cheaper than new Mazda injectors.
BTW,
42lb injectors are equal to 440cc injectors (#cc divided by 10.5)
according to
RC Engineering. Sorry, I don't remember the impedance of these.
Ken Powell
>> Homepage: http://www.flyrotary.com/
>> Archive: http://lancaironline.net/lists/flyrotary/List.html
|
|