|
George,
I was trying to find out what diameters (cross section) of the high temp
(500 degree f) PFA-SIL was available.........I wonder if the (450 degree f)
FEP-SIL might be good enough for the coolent O-rings but use the high
temp for the rotor side seal O-rings........If the coolent seals ever see even
450 degrees the aluminum rotor hsgs will probably start to crush !!
"Opinions"
--
Kelly Troyer
Dyke Delta/13B/RD1C/EC2
-------------- Original message from "George Lendich" <lendich@optusnet.com.au>: --------------
Kelly,
What was that in relation to.
George ( down under)
Group,
More info from "Creavey"
--
Kelly Troyer
Dyke Delta/13B/RD1C/EC2
| From: |
|
| To: |
"Kelly Troyer" <keltro@att.net> |
| Subject: |
RE: Sil-PFA .098 availability |
| Date: |
Thu, 21 Jul 2005 17:12:27 +0000 [View Source] |
PFA is available in .103” cross section.
Jeff
From: Kelly Troyer [mailto:keltro@att.net]
Sent: Thursday, July 21, 2005 11:48 AM
To: Jeff Chrysler
Subject: RE: Sil-PFA .098 availability
Thanks Jeff........What diameters are available in PFA-SIL........ .100
would probably work if available.
|
|