|
|
I have my oil pressure take off from a similar fitting. A temp fitting there should do fine although it might read a degree or two more after going into the engine and back out to the filter area than it would if you measured it going into the engine. But, I don't see that as any problem.
Ed
----- Original Message ----- From: "Dale Rogers" <dale.r@cox.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Monday, May 02, 2005 11:39 AM
Subject: [FlyRotary] Re: temp senders - correction
Hi All,
I wrote:
... In the photo
below, the blank facet in the lower left is reserved for
that fitting.
Got my lefts and rights mixed up. It's the undrilled
on on the lower right.
Dale R. (Saddling up for a 200 mile drive to fix a tap drive)
COZY MkIV-R13B #1254
http://members.cox.net/rogersda/Products.htm
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Homepage: http://www.flyrotary.com/
Archive: http://lancaironline.net/lists/flyrotary/List.html
|
|