|
No trouble sleeping Todd - too innocent
{:>). Fortunately, I am one of those who only need about 4-5
hours, 6 hours is sleeping in {:>). I just got tired of rewinding the
tape and wanted a paper checklist I could actually check off the items as I did
them. But, having it running in the shop so you could see visually would
help. I tired to index the paper to a video rev counter, but it just got
to be more work than it justified {:>)
Interesting, I wonder if a transcript can be
copyrighted by the transcriber? No interest in doing so in any case, not
as anal retentive as some folks are about that. I might infrequently
copyright something I created that I think of potential value (whether it ever
is or not), but not something I basically copied from somebody
else.
Ed A
----- Original Message -----
Sent: Monday, April 18, 2005 3:18
AM
Subject: [FlyRotary] Re: 13B Overhaul
Steps
Excellent work Ed. Do you have trouble sleeping? Maybe PL would like to
post this on his site, but then there's that copyright thing...
:-)
When I rebuilt my engine, I bought a small 12" TV with
built-in VCR and I hung it in my shop. It worked out great as I'd watch Bruce
perform each step, then pause/stop it while I did the
same.
Todd
Attached is a transcript of the video Bruce
T made back a few years ago (a newer version is out) for overhauling
the 13B. I the video quite useful as it answered lots of things not in
the workshop manuals. In any case, I had laptop in lap and sat in bed
several nights copying what Bruce was saying as a written reference for out
in the shop when working.
|