|
|
Hi Bob;
Could be that post, in which case no harm would be done. I'm
getting way behind in keeping up with the e-mail these days, so must
have just misread the question in my haste.
Todd
Hi Todd,
You may be refering to a different post, but I had mentioned drilling
out the AN-3 fitting to match the fitting that came with the pump.
It's slightly under 1/4 inch, and the AN-3 is only 1/8 inch.
Bob W.
Someone had mentioned drilling out the pump outlet to reduce this restriction, but that would be a really bad idea.
|
|