|
|
Ernest, I think you might be referring to the time Tracy received some drive
shafts which had not been manufactured correctly. Wasn't an incompatibility
problem it was failure in manufacturing and quality control.
Ed A
----- Original Message -----
From: "Ernest Christley" <echristl@cisco.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Monday, February 21, 2005 10:49 AM
Subject: [FlyRotary] Re: PSRU - hub/prop end
Tracy Crook wrote:
> Ernest,
> I'm not sure what problem you are referring to. I do not recall
> anything relating to gear compatibility in my development.
>
> Tracy
Tracy,
I could very well have read it somewhere else. I thought I remembered a
picture from your website where you were shining a light through a gear
set to show how the teeth were not meshing completely. The condition
was given as the root cause for premature failure of some gears. I
could very well have seen that someplace else.
>> Homepage: http://www.flyrotary.com/
>> Archive: http://lancaironline.net/lists/flyrotary/List.html
|
|