Mailing List flyrotary@lancaironline.net Message #17430
From: Ed Anderson <eanderson@carolina.rr.com>
Subject: Re: [FlyRotary] Re: Digital Fuel Monitoring System
Date: Fri, 18 Feb 2005 09:40:10 -0500
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Certainly a possibility to consider there, Mark.  Will take all suggestions
into consideration - but first must see how it flies.

Ed A
----- Original Message -----
From: "Mark R Steitle" <mark.steitle@austin.utexas.edu>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Friday, February 18, 2005 8:15 AM
Subject: [FlyRotary] Re: Digital Fuel Monitoring System



Ed,
How about a kit version?

Mark S.

-----Original Message-----
From: Rotary motors in aircraft on behalf of Ed Anderson
Sent: Fri 2/18/2005 7:13 AM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Digital Fuel Monitoring System

Hi Bob,

Have not given it serious thought.    Would depend on how much demand, cost,
etc.  Also want to see how it works out.  The previous one I designed and
built of analog parts worked fine - but, this digital design world is new to
me. So, I need to test it thoroughly on the aircraft - particularly the
"automatic" calibration algorithm I have in the software code.

 However, if I did decide to sell it would probably be mid-late summer time
before it happened.  The current design is somewhat labor intensive in
cutting apart the board into the front panel and Chip board, placing
"sockets and plugs" on each board so they can plug together, etc.  I would
need to look a ways to simplify it a bit and I am certain the layout of the
board could be improved.  Already, Finn has pointed out my resistors are
mounted by their "legs" {:>).

Ed A
 ----- Original Message -----
 From: Bob Perkinson
 To: Rotary motors in aircraft
 Sent: Friday, February 18, 2005 2:14 AM
 Subject: [FlyRotary] Re: Digital Fuel Monitoring System


 Are you going to sell them for how much, and when?



 Bob Perkinson

 Hendersonville, TN.

 RV9A

 If Nothing Changes

 Nothing Changes!





 Here are a couple of photos of my homebrew digital fuel monitoring system,
I have mentioned in the past



 Ed





 Ed Anderson
 Rv-6A N494BW Rotary Powered
 Matthews, NC
 eanderson@carolina.rr.com




----------------------------------------------------------------------------
----


>>  Homepage:  http://www.flyrotary.com/
>>  Archive:   http://lancaironline.net/lists/flyrotary/List.html



Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster