----- -----
Paul,
What is the thickness of the
motor mount plate? This looks similar to what I am atempting to
make.
Wendell
Hey, Rusty....I braved the 50 degree cold
temperatures and went to the hangar and removed the cowling to take these
pictures of the fitting I substituted for the banjo fitting. Originally, I
took a file and made the head of the motor mount bolt about 1/3 shorter to
allow more clearance for the banjo fitting. After I replaced the banjo
fitting with this adapter, I found I had a little more clearance. The Earl's
aluminum female swivel is fairly thin-walled, and there is more daylight
between the fitting and motor mount bolt now. I should have taken this picture
from a lower angle so you could see that there is about 1/8" distance between
the motor mount bolt and the new hose/fitting combination. Hope this
helps. Paul Conner
>> Homepage:
http://www.flyrotary.com/
>> Archive:
http://lancaironline.net/lists/flyrotary/List.html