|
|
----- Original Message ----- From: "Ernest Christley" <echristl@cisco.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Monday, January 24, 2005 2:32 PM
Subject: [FlyRotary] Re: banjo oil fitting
Paul wrote:
I should have taken this picture from a lower angle so you could see that there is about 1/8" distance between the motor mount bolt and the new hose/fitting combination. Hope this helps. Paul Conner
1/8" ?
How much play does your motor mount bushings give you?
Don't know for sure, but I can't see any visual movement when it's running even with throttle advancement. There is also no evidence/marks on the bolt or the fitting indicating that the two have not made contact. Paul Conner
Homepage: http://www.flyrotary.com/
Archive: http://lancaironline.net/lists/flyrotary/List.html
-- No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.7.3 - Release Date: 1/24/2005
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.7.3 - Release Date: 1/24/2005
|
|