Received-SPF: pass
 receiver=logan.com; client-ip=205.152.59.64; envelope-from=sqpilot@bellsouth.net
Message-ID: <01ab01c50255$74bc4b60$a52dd6d1@paul52u7f5qyav>
From: "Paul" <sqpilot@bellsouth.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
References: <list-619933@logan.com>
Subject: Re: [FlyRotary] Re: banjo oil fitting
Date: Mon, 24 Jan 2005 14:44:10 -0600
Mime-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; format=flowed; charset=iso-8859-1; reply-type=response


----- Original Message ----- 
From: "Ernest Christley" <echristl@cisco.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Monday, January 24, 2005 2:32 PM
Subject: [FlyRotary] Re: banjo oil fitting


> Paul wrote:
>
>> I should have taken this picture from a lower angle so you could see that 
>> there is about 1/8" distance between the motor mount bolt and the new 
>> hose/fitting combination. Hope this helps.  Paul Conner
>
> 1/8" ?
>
> How much play does your motor mount bushings give you?
>

Don't know for sure, but I can't see any visual movement when it's running 
even with throttle advancement.  There is also no evidence/marks on the bolt 
or the fitting indicating that the two have not made contact. Paul Conner

>>>  Homepage:  http://www.flyrotary.com/
>>>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.300 / Virus Database: 265.7.3 - Release Date: 1/24/2005
>
> 


-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.7.3 - Release Date: 1/24/2005