----- Original Message -----

From: Mark R Steitle

To: Rotary motors in aircraft

Sent: Monday, January 24, 2005 2:29 PM

Subject: [FlyRotary] Re: Battery load test

Paul,

The starter on my a/c, like many/most homebuilts, is powered through a main battery relay (looks like a Ford “fender-mount” starter relay).  If the starter sticks, opening the main battery relay should interrupt power to the starter, along with everything else on that circuit.  This isn’t an issue on my design as I have installed the extra starter relay.      

 

BTW, I ran across the sales brochure for the Speed Queen yesterday.  Send me an email with your home address if you would like me to send it to you.  I still haven’t found the video though. 

 

Mark S.

 

 

---

From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Paul
Sent: Monday, January 24, 2005 1:20 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Battery load test

 

Hi, Mark....unfortunately, I am presently working as a heavy truck mechanic (18 wheelers), and I have been on many a road call where the starter was stuck engaged.On a few units, once I disconnected the batteries (4 of them) the starter would be OK to use again.  On two of the trucks, I could not get to them in time, and it burned the wiring harness so badly that the whole harness had to be replaced.  The other tractor burned to the ground. Melted all the tires, all windows gone, all fiberglass hood and fender parts melted....not a pretty picture. 

      I have a quick disconnect on the negative terminal on my motor home so that if the starter solenoid should hang up, I can simply open the blade-style switch and disconnect the battery. Hopefully I will never need it, but it's nice to know it's there just in case.  I have been looking at the various battery switches/quick disconnects at West Marine, and have been considering one for my aircraft.  Heck, it's convenient jus to be able to quick-disconnect the battery when working on the panel, fuel pumps, spark plugs/wires, etc.  Just a thought.  Paul Conner

----- Original Message -----

From: Mark R Steitle

To: Rotary motors in aircraft

Sent: Monday, January 24, 2005 8:47 AM

Subject: [FlyRotary] Re: Battery load test

 

Wendell,

There is some benefit to using a starter relay in addition to the starter solenoid.  The argument is that this arrangement will keep the fat wire going to the starter from being always hot.  Also, I’ve heard stories of starter solenoids sticking with no way to stop the starter until it runs the battery dead.  Not sure I buy that argument though.  I tied my alternator B+ wire to the battery terminal on the solenoid (mounted on firewall) rather than running it all the way back to the battery (in the tail).  I also picked up on the same B+ terminal to provide power to the Main Power Buss.  This saved about 25’ of heavy gauge wire, offsetting the weight of the solenoid.

 

Mark S.

    

 

 

Refering to the battery going directly to the starter,  most all starters with built in solinoids are so wired.  I remember having a starter to hang on occasion and drain the battery or ruin the starter.  Is it practicle to use a relay in conjunction with the starter/solenoid set up?

Wendell

---

No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.7.2 - Release Date: 1/21/2005

---

No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.7.3 - Release Date: 1/24/2005