|
|
If you want a pair of those "bell mouths" I could gift you with a
couple. I got them from Atkins thinking I could use them on my setup.
But there just isn't room. A problem with the straight in manifold
from Atkins is just that - it sticks straight out. Sticking out isn't
a problem on a box nosed RV - but for us pushers - we're trying to
taper the cowl to a point in the back to let our fans breath. As it is
I had to put a little bump on my cowl to accommodate the fuel rail.
Thanx,
Joe Hull
Bellevue (Seattle), Washington
Cozy MkIV #991 (working on Engine & Electrical & Finishing)
http://www.maddyhome.com/canardpages/pages/JoeHull/index.html
-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]
On Behalf Of Paul
Sent: Friday, December 17, 2004 8:29 AM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Atkins
Thanks for the picture of Atkin's intake manifold/installation,
Joe....I was
considering the bell mouths for the intakes, now I see what they
look like
and have an idea of xsize, etc. Thanks again for taking the time to
find
and send the picture. Paul Conner
----- Original Message -----
From: "Joseph M Berki" <Joseph.M.Berki@grc.nasa.gov>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Thursday, December 16, 2004 5:15 AM
Subject: [FlyRotary] Re: Atkins
> Someone is looking for Dave's installation as it was at Osh, I
attached a
> pic. Hope this helps.
>
> Joe Berki
> LimoEZ
>
> At 09:11 AM 12/15/2004 -0800, Joe Hull wrote:
>>Paul -
>>Yes, David had/has a heat shield under his intake manifold. I have
a
>>bunch of pictures - just not with me at work. The only two
>>semi-relevant pics I have on my laptop here are from his old
setup. He
>>changed his engine installation last Spring/Summer and had the new
>>setup at Oshkosh. The attached pics don't directly show his heat
>>shield - but you can see it through the manifold on one and it's
in
>>the lower left on the other one.
>>
>>If David isn't able to get pics of his new install to you I'll see
if
>>I've got any at home from Osh-2004.
>>
>>Thanx,
>>Joe Hull
>>Bellevue (Seattle), Washington
>>Cozy MkIV #991 (working on Engine & Electrical & Finishing)
>>http://www.maddyhome.com/canardpages/pages/JoeHull/index.html
>>
>
--------------------------------------------------------------------
------------
>>> Homepage: http://www.flyrotary.com/
>>> Archive: http://lancaironline.net/lists/flyrotary/List.html
>
>> Homepage: http://www.flyrotary.com/
>> Archive: http://lancaironline.net/lists/flyrotary/List.html
|
|