|
|
Ken,
The one experience I've had with a "stopped" engine was in a C150. I
asked an instructor how much different it was if the engine was really
stopped as compared to idleing. We were at about 9000 ft (4000 AGL) so
he killed the engine. I was surprised that the prop did not windmill. It stopped! After gliding around for a bit, we put it into a dive, and
the prop didn't budge till we were over 120 IAS. With a gear reduction,
it would be that much harder for the prop to turn the engine, so you
probably won't get a windmillng prop, which would be worse.
Bob White
On Mon, 13 Dec 2004 04:16:32 +0000
kenpowell@comcast.net wrote:
Yes, I have been told of the differences in a 'real' engine out as
opposed to just pulling the engine to idle. However, in the junky
rentals that I fly I wouldn't dream of actually killing the engine and
flying it to the ground. That would be the one time that I came up
'short' and the engine wouldn't crank especially since the glide
really is shorter with the engine off and NO thrust (I also understand
that a windmilling prop causes more drag than a 'stopped' prop). So I
guess that I'll just have to continue my practise with the engine at
'idle'.
Ken P.
--
http://www.bob-white.com
N93BD - Rotary Powered BD-4 (soon)
|
|