|
|
Neat work Dale. Now I want to know where you found those "curved" drill
bits {:>). I presume you used a grinder bit to cut between the two vertical
holes?
Ed
----- Original Message -----
From: "Dale Rogers" <rogersda@cox.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Friday, December 10, 2004 12:16 AM
Subject: [FlyRotary] Re: In-line Oil Filter - reprise
Hi All,
A while back, there was some discussion regarding putting
an oil filter on the line to or from the oil cooler, and
the need for something to cap off the original equipment
filter block with a pass-through. As an exercise, I decided
to see if I could come up with a totally blind pass through,
and the result is what you see in the attached photos.
Dale R.
COZY MkIV #1254
----------------------------------------------------------------------------
----
----------------------------------------------------------------------------
----
----------------------------------------------------------------------------
----
>> Homepage: http://www.flyrotary.com/
>> Archive: http://lancaironline.net/lists/flyrotary/List.html
|
|