Mailing List flyrotary@lancaironline.net Message #13309
From: paul <sqpilot@bellsouth.net>
Subject: Re: [FlyRotary] Re: Oil leak at filter solved (unshrouded plug ?)
Date: Mon, 29 Nov 2004 20:36:19 -0600
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
 Message Header

Undecoded Message
Perhaps I should have read all my messages before sending the post regarding the NGK BR9EQ plugs.  I didn't realize that there was a special socket.  That might be what I need to install the NGK B9EGV plugs?   Thanks....Paul Conner...still reading the other 79 messages I received this afternoon.
----- Original Message -----
From: Al Gietzen
Sent: Monday, November 29, 2004 12:59 PM
Subject: [FlyRotary] Re: Oil leak at filter solved (unshrouded plug ?)

 

Subject: [FlyRotary] Re: Oil leak at filter solved (unshrouded plug ?)

 

 

I'm assuming you use the same plug in leading or trailing positions.

 

Yes.

 

Do you have to worry about penatration depth (apex scraping) with these plugs.

 

No; at least not in my 3rd gen 20B rotor housings.  You will need the spendy plug socket wrench from RB; or make your own.

 

Al

Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster