|
What I had really wanted to do is move the
transition point up to 28"MAP and fly around on just the primaries below that
MAP. But I couldn't seem to get the transition any higher than 21 or
22". Is there some max MAP set into the EC2?
My next idea was to set the transition very
low, then unplug the secondaries and turn on the cold start switch all the
time. But I never tried that. You are right that it is very hard to
start with the secondaries unplugged (but possible).
But after re-installing the intake plenum I
have solved the problem. Since I can't install my O2 sensor anytime soon I
will just leave well enough alone.
Dave Leonard
This weekend I will just unplug the
power from the secondary injectors, then work with the transition point and
the mixture map, and I will re-install the air-box.
Dave Leonard
Ooh, not sure about that. Might be
hard to start and you will need to turn on the cold start switch to run
above staging point. I may be missing what you have in mind
though.
Tracy
|