|
|
That would be mode 1. -100 would not be unusual for an idle MAP
correction.
Tracy
----- Original Message -----
Sent: Friday, September 24, 2004 10:46
AM
Subject: [FlyRotary] Re: EC2
problem
John,
I was afraid someone would ask
that. Its been so long ago, and I don' have the EC-2 instructions with
me, I can't tell you what mode it was. (I could look it up when I get
home from work later today) I do remember the instructions stating that
you could adjust a max of +/- 127 steps. There is a second method of
adjustment if you need more than that. I was very surprised that I had
to go as far as I did to get it to idle properly, with the mixture knob
centered in the 12 o'clock position at the same time. I'm sure I'll have
to some more tweaking when I can actually load the engine. (Tracy
mentions that you shouldn't even attempt tuning without a load on the
engine... Oops, sorry Tracy.)
Mark S.
At 10:17 AM
9/24/2004 -0400, you wrote:
>I had to change my map
settings to about -100 steps
Mark.
Please elaborate. -100 steps in
what mode?
Regards, John
|
|