Mailing List flyrotary@lancaironline.net Message #10699
From: Ed Anderson <eanderson@carolina.rr.com>
Subject: Re: [FlyRotary] Re: Getting there
Date: Mon, 23 Aug 2004 20:31:38 -0400
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
I only have 24 in^2 on my oil cooler and it has not (yet) the benefit of our
increased knowledge of how to build a better diffuser.  So at 20 in^2, you
should be OK.

Ed Anderson
RV-6A N494BW Rotary Powered
Matthews, NC
----- Original Message ----- From: "Steve Brooks" <steve@tsisp.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Monday, August 23, 2004 7:50 AM
Subject: [FlyRotary] Re: Getting there


Ed,
The oil cooler is getting about 1/3 of the scoop.  Its size is about
4.5"x4.5", or 20.25 sq in.  I wish that the scoop was larger, but John
Slade
seems to be getting good cooling on his, so I am hoping that mine will as
well.

I still have to connect the hoses, and a couple of the fittings should be
here today, or tomorrow.  I hope to do ground testing this week, and
hopefully a test flight by the weekend.

Thanks for the compliment.

Steve

 -----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]  On
Behalf Of Ed Anderson
Sent: Sunday, August 22, 2004 7:22 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Getting there

Looking good, Steve.

   The oil cooler inlet duct looks a bit small - but hard to tell from the
angle.  I presume its on the order of 20 -24 sq inch?  I see you have it
situated where the tanks meet in the center which would probably be an
area
of higher pressure given the solid tanks blocking flow to the rear in that
area.  The oil tank has a better plenum than I have on my oil cooler so
will
be very interested in seeing how it goes.  Very neat work

Ed


Ed Anderson
RV-6A N494BW Rotary Powered
Matthews, NC
----- Original Message -----
From: "Steve Brooks" <steve@tsisp.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Sunday, August 22, 2004 4:51 PM
Subject: [FlyRotary] Getting there


> My new cooling system is coming along.  Attached are a couple of photos.

> The first is a picture of the cooling assembly while sitting on the
bench,
> which houses the 2 evaporator cores and the oil cooler.  The 2nd photo
is
> with it mounted in the plane.
>
> Steve Brooks
> Cozy MKIV N75CZ 13BT
>
>
>
>
>


--------------------------------------------------------------------------
--
----


> >>  Homepage:  http://www.flyrotary.com/
> >>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
>



>>  Homepage:  http://www.flyrotary.com/
>>  Archive:   http://lancaironline.net/lists/flyrotary/List.html


>>  Homepage:  http://www.flyrotary.com/
>>  Archive:   http://lancaironline.net/lists/flyrotary/List.html



Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster