|
Message
After ordering pumps from Tracy, Laura informed me (see email
below) that the inlet side is fixed as a barb connection. So again I must
go to the well of knowledge for help. Anybody out there have a part number
or source for an EFI pump capable of using AN fittings on both sides.
Thanks again.
Hi
Ron,
I'm not sure how Tracy
decides what to carry, but the pumps I got from him were Walbro's. I don't
have the pumps, or the documentation that came with them in front of me, but
take a look at:
http://www.autoperformanceengineering.com/html/ext_pump.html
I'd bet that my pumps are the GSL393
version, which is plenty for what we're doing with them. Also note that
the AN fittings are listed as well. I've never used
this business, but they turned up on a search with good info about the
pumps.
If you want me to see if I can tell
which pumps I have, let me know, and I'll put it on the list for the next trip
to the hanger.
Cheers,
Rusty (sweating off important bits of
anatomy)
|