Return-Path: Received: from olympus.net ([198.133.237.6]) by ns1.olsusa.com (Post.Office MTA v3.5.3 release 223 ID# 0-64832U3500L350S0V35) with ESMTP id com for ; Thu, 25 May 2000 11:24:11 -0400 Received: from pt19484.olympus.net ([207.149.194.84] helo=station4) by olympus.net with smtp (Exim 3.12 #1) id 12uzaM-0006kU-00 for lancair.list@olsusa.com; Thu, 25 May 2000 08:30:10 -0700 Message-ID: <003001bfc65d$b5570360$0464a8c0@station4> From: "John Barrett" <2thman@olympus.net> To: "Lancair Mail List" Subject: Gap seals... Katana prop tape? Date: Thu, 25 May 2000 07:40:35 -0700 X-Mailing-List: lancair.list@olsusa.com Mime-Version: 1.0 <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> Hi all, I was planning to use tape to seal the wing-wing root gap, but after some LML discussion on the subject about 3 to 6 months ago decided it would be better to go back and build in the overlap fit. It wasn't that difficult to do - just layup three BID 3" wide tape over duct tape spacer then, after removing the wings and the tape, use Super Fill or other body material to fair in the BID tape. Regards, John Barrett - LIVP CARBINGE- "The World Hinges on Us" 360 385 1000 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://www.olsusa.com/Users/Mkaye/maillist.html LML Builders' Bookstore: http://www.buildersbooks.com/lancair Please send your photos and drawings to marvkaye@olsusa.com. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>